Peninsular Units

When planning peninsular wall units you need to allow an additional 18mm to allow for the corner post.

Also remember to order a support frame and leg.

There are two sizes of peninsular support frame, one to take 2 x 500mm unit and one to take 3 x 300mm units

Planning Dimensions - Peninsular Unit

Please note that when ordering a peninsular unit a base corner conversion post is also required.

This post is 18mm thick and is supplied in 2 pieces. One piece is 148mm and the other is 60mm as shown here

The unit off which the peninsular is hung is rotated 90°

Corner Situations

Fitting units into the corners is made simple with four seasons. You can choose to use conventional corner units with a corner conversion kit, or use 'l' shape corner units. This give various size options to fit into your kitchen layout. Before planning or fitting corner units you should read the following guidelines and refer to the diagrams at the bottom of the page.

Conventional Corner Units

Fitting:

1. Whenever possible, when using conventional corner base units, use a conventional corner wall unit. This will create a clean line to your kitchen layout.
2. All corner base units are supplied with full fitting instructions and a corner conversion kit.
3. Ensure that the units are positioned at right angles to each other before fitting the corner post. The corner post is supplied with the corner conversion kit
4. Ensure that the corner cabinet end is pulled off the wall by 123mm for the 1000mm base unit and by 223mm fir the 800mm base unit. (see diagrams)
5. For 600m corner wall units ensure that the corner cabinet end is pulled off the wall by 23mm

Accessories:

1. Corner posts are supplied in matching decorative colour finishes
2. 170° Hinges are supplied with the corner conversion kit. This allows the best possible access.
3. 170° Carousel set is available for use with the 1000mm corner base unit

'L' Shape Corner Units

Fitting:

1. The 'l' shape corner units (base and wall) are supplied with full fitting instructions and a corner fillet
2. When using 'l' shape base or wall units, only the door without the corner fillet should be fitted with a handle.
3. The 950 x 950mm 'l' shape base unit and 650 x 650mm 'l' shape wall unit are designed specifically for a corner situation and do not require any extra space leaving behind or beside them.
4. Wherever possible, when using 'l' shape corner base units use 'l' shape corner wall units. This will create a clean line to your kitchen layout
5. No drawers are available with the 950 x 950mm 'l' shape corner base unit. Where drawerline is required, the drawer fronts can be fixed to the doors with straps which are provided in the cabinet pack
6. Because of its size and weight, the 950 x 950mm 'l' shape corner base unit is supplied in two packs.

Accessories:

1. A 270° Carousel set is available for use with the 'L' shape corner base unit

Corner Situations Diagrams

Previous     1     2     3     4     5     6     7     8     9     10     11     Next

Kitchen Planning Guide     The Work Triangle     Do's and Dont's     Safety Regulations     Final Stages of Planning     Layout Plan

Peninsular Units & Corner Units     Design Features