Base Units

Requires:

1 x 1000mm Drawerline Base Unit

1 x Breakfast Bar

Fitting Instructions:

Cut through top of 555MM doors AND attach breakfast bar below drawer fronts with hinge brackets. (drawers to work). 

Requires:

1 x 1000mm Drawerline Base Units

Plinth & Worktop

Fitting Instructions:

Cut down 100mm base unit at drawerline height. Rest worktop section on top and secure with hinge brackets. Run plinth around the inside. Finish cut worktop with edging tape. Use chipboard support below worktop at rear.

Requires:

2 x 300mm Base Units

2 x 330mm Open End Wall Units

Plinth & Worktop

Fitting Instructions:

Fix two open wall units together as shown and cut worktop and plinth to match the shape of the shelves

Requires:

1 x 1000mm Base Unit

1 x 330mm Open End Wall Unit

2 x 150mm Wine Racks

Plinth & Worktop

Fitting Instructions:

Use open end wall unit and wine racks as base unit.

Previous     1     2     3     4     5     6     7     8     9     10     11     Next

Kitchen Planning Guide     The Work Triangle     Do's and Dont's     Safety Regulations     Final Stages of Planning     Layout Plan

Peninsular Units & Corner Units     Design Features