Wall Units

Requires:

3 x 500mm Wall Units

1 x 1000mm Wall Unit

1 x 400mm Wall Unit

1 x 625 x 625mm 'L' Shape Wall Unit

2 x 300mm Wall Units

1 x 276 x 600mm Bridging Cupboard

1 x 330mm Open End Wall Unit

Cornice, Light Pelmet & Plinth

Fitting Instructions:

Raise wall units in stages of 150mm, use plinth at rear of corner units. Run cornice all the way round including the upsides where necessary. Do not run cornice at the front of the corner units, run it on top of the plinth at the back. This will create a shelf structure. Run pelmet around bottom of units.

Requires:

2 x 300mm Wall Units

2 x 276 x 600mm Bridging Cupboard

1 x Breakfast Bar Back Panel

Cornice, Light Pelmet & Plinth

Fitting Instructions:

Drop bridging cupboard 150mm from top of wall units. Run breakfast bar back panel below bridging cupboards and plinth above. Create a shelf by running a plinth between the bottom of the two wall units. Finish off with cornice and pelmet.

Requires:

3 x 500mm Wall Units

2 x 300mm Wall Units

Cornice, Light Pelmet & Plinth

Fitting Instructions:

Stagger and raise wall units by 150mm. Use plinth at rear of middle unit to create a top shelf feature. Use plinth in spaces at bottom of units to create shelves. Finish off with cornice and pelmet, including upsides where necessary.

Requires:

2 x 300mm Wall Units

1 x Canopy

Cornice, Light Pelmet & Plinth

Fitting Instructions:

Raise cabinets 150mm from top of canopy. Add plinth at back to create shelf feature. Finish off with cornice and pelmet, including upsides where necessary.

Requires:

4 x 500mm Wall Units

Cornice, Light Pelmet and Plinth

Fitting Instructions:

Raise inside wall units 150mm. Create a shelf by running plinth between the bottom of the two outer units. Finish off with cornice and pelmet including upsides where necessary. 

Previous     1     2     3     4     5     6     7     8     9     10     11    Next

Kitchen Planning Guide     The Work Triangle     Do's and Dont's     Safety Regulations     Final Stages of Planning     Layout Plan

Peninsular Units & Corner Units     Design Features