Low Level Hob

Requires:

4 x 300mm Wall units

1 x 600mm Integrated hood

2 x 330mm Open end wall units and gallery rails

4 x 330mm Drawerline base units

1 x 600mm Pan drawer base unit

2 x 330mm Open end base units and gallery rails, cornice, light pelmet, plinth & worktop

Fitting Instructions:

Wall Units

Drop wall units 150mm (see Illustration)

Use plinth at rear above.

Run cornice around

Base Units

Cut down 2 x 300mm base units and 1 x 600mm Pan drawer base at drawerline height.

N.B. Remember to order matching end panels for exposed ends of units if not a coordinated finish

Low Level Breakfast Bar

Requires:

3 x 300mm Wall Units

2 x 500mm Wall Units

2 x 500mm Glass Peninsular Units

3 x 300mm Drawerline Base Units

1 x 1000mm Drawerline Corner Base Unit

1 x 1000mm Drawerline Base Unit

1 x 1250mm Peninsular Support Frame

1 x Peninsular Support Leg

1 x Breakfast Bar Back Panel

1 x Wall Corner Fillet

Cornice, Light Pelmet, Plinth & Worktop, 30mm Corner Post/Filler Panel

Fitting Instructions:

Cut down 300mm base at drawerline height. Rest breakfast bar (cut out) on low base and secure to breakfast bar back panel with hinge brackets. 300mm wall to face outwards on opposite side of peninsular units

Dropped Dresser Units

Requires:

2 x 400mm Wall Units

2 x 500 x 1263mm Glass Dresser Units

1 x 330mm Open End Wall Unit and Gallery Rails

2 x 400mm Drawerline Base Units

1 x 1000mm Drawerline Base Unit

1 x 330mm Open End Base Unit And Gallery Rails

1 x 500 x 2173mm Larder Unit

Cornice, Light Pelmet, Plinth & Worktop

Fitting Instructions:

Cut 1000mm base down at drawerline height to create shelf recess above dressers. Use plinth to run across rear of shelf. Run cornice around between the two wall units above the dresser

Chimney Breast Feature

Requires:

2 x 500mm Glass Wall Units

4 x 300mm Wall Units

1 x 276 x 600mm Bridging Cupboard

2 x 500mm Drawerline Base Units

2 x 300mm Drawerline Base Units

1 x 600mm Pan Drawer Base Unit

4 x 150mm Wine Racks

Chipboard

Cornice, Light Pelmet, Plinth & Worktop

Fitting Instructions:

Requires construction of false chimney breast to be from 100mm to 300mm forward of back wall and 1200mm wide

Previous     1     2     3     4     5     6     7     8     9     10     11     Next

Kitchen Planning Guide     The Work Triangle     Do's and Don'ts     Safety Regulations     Final Stages of Planning     Layout Plan

Peninsular Units & Corner Units     Design Features